X Series E83 X3 3.0i (M54) OFFRD
Unclip plug connections (1) on oxygen control sensors from
holders and disconnect.
Release screws.
Remove electronics box cover (1).
Installation:
Engage electronics box cover (1) correctly in hinges.
Lift cables with profile seals (1) and (2) out of partition or
electronics box.
Unlock plug connections in electronics box and disconnect.
Installation:
To prevent leaks, you must install profile seals (1) and (2)
correctly.
Unlock plug (1) and detach from alternator.
RA Replacing wiring harness section for engine (M54)
BMW AG - TIS
16.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -