X Series E83 X3 3.0i (M54) OFFRD
13 62 560
Removing and installing/replacing air-mass
flow sensor (M54)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
Unlock plug (1) and remove.
Release clips (2).
Release clamp (3).
Pull air-mass flow sensor (4) first out of top section of intake filter
housing and then out of air intake hose.
Installation:
Check sealing ring (1) between air-mass flow sensor and intake
filter housing for damage, replace if necessary.
Coat sealing ring (1) with suitable antiseize agent.
Note:
Illustrations show E85.
Installation:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass flow sensor (M54)
BMW AG - TIS
16.02.2013 14:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -