X Series E83 X3 3.0i (M54) OFFRD
17 11 040
Removing and installing/replacing thermostat
insert for transmission oil cooling (M54)
Warning!
Danger of scalding - this task may only be carried out once
engine has cooled down.
Remove coolant expansion tank.
Note:
For purposes of clarity, this work step is shown on a removed
expansion tank/mounting plate.
Pull coolant expansion tank (1) upwards out of mounting
plate (3).
Pull thermostat insert (2) upwards out of connection piece.
Installation:
Check O-rings, replace if necessary.
Pay attention to turning lock when installing thermostat
insert (2).
RA Removing and installing/replacing thermostat insert for transmission oil cooling
BMW AG - TIS
16.02.2013 14:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -