X Series E83 X3 3.0i (M54) OFFRD
17 11 046
Removing and installing / replacing module
carrier
Necessary preliminary tasks:
•
Remove power steering cooling loop
•
If necessary, slacken A/C condenser and secure against
damage and against falling down. Refer to Remove A/C
condenser.
Release expander rivet and remove left module carrier (1).
Installation:
Rubber mounts fall out easily, ensure correct installation position.
Remove right module carrier (1). Make sure rubber mount is in
correct installation position.
When replacing module carrier:
Convert power steering cooling loop.
RA Removing and installing / replacing module carrier
BMW AG - TIS
16.02.2013 14:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
