X Series E83 X3 3.0i (M54) OFFRD
Unscrew bolt (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release screw (1) on engine carrier.
Lay hydraulic lines to one side.
Lift off cover.
Crank engine at vibration damper in direction of rotation until
screw is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 2 screws.
Tightening torque 24 40 1AZ
.
RA Removing and installing automatic transmission (A5S 360R / 390R)
BMW AG - TIS
16.02.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
