X Series E83 X3 3.0i (M54) OFFRD
Installation:
Check dowel sleeves (1) and (2) for correct seating.
Replace damaged dowel sleeves.
Important!
When joining up engine and transmission, ensure ease of
movement of torque converter.
Installation:
The sheet metal flywheel is equipped with three recesses for
the torque converter retaining tabs.
When guiding the engine and transmission together the three
mounting tabs on the torque converter must be aligned with
the three indentations in the sheet metal flywheel.
Non-conformance leads to follow-up damage on the
automatic transmission.
Turning on the torque converter, or engine, is no longer
possible after guiding the engine and transmission together
and would lead to damage.
Installation:
Before installing transmission cross-member, turn special tool
11 0 250 back with adjusting screw (1) to measurement "A"
(installation position).
Installation position, measurement "A" = approx. 36 cm.
RA Removing and installing automatic transmission (A5S 360R / 390R)
BMW AG - TIS
16.02.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -