X Series E83 X3 3.0i (M54) OFFRD
27 10 020
Installing replacement transfer case (ATC 400
X-Drive)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Recycling:
Catch and dispose of escaping transmission oil. Observe country-
specific waste-disposal regulations.
Important!
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 2 7AZ
.
Gear oil level to lower edge of filler plug (1).
Use only the approved transmission oil.
Failure to comply with this requirement will result in serious
damage to the transfer case!
Necessary preliminary tasks:
-
Drain gear oil at oil drain plug.
Tightening torque 27 2 11AZ
.
-
Remove transfer case.
RA Installing replacement transfer case (ATC 400 X-Drive)
BMW AG - TIS
16.02.2013 16:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
