X Series E83 X3 3.0i (M54) OFFRD
31 35 021
Replacing rubber mounts of stabilizer
retaining fixture on front axle carrier
Necessary preliminary tasks:
•
Remove front underbody protection
•
If necessary, remove steering gear cover on left and right
Release screws (1) and remove stabilizer from front axle carrier.
Remove both retaining brackets (2) and rubber mount (3).
Installation:
Keep retaining bracket (2), rubber mount (3) and stabilizer clean
and free from oil and grease.
Tightening torque 31 35 1AZ
.
RA Replacing rubber mounts of stabilizer retaining fixture on front axle carrier
BMW AG - TIS
16.02.2013 16:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
