X Series E83 X3 3.0i (M54) OFFRD
32 13 060
Removing and installing/replacing power
steering gear
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose off hydraulic fluid from fluid reservoir
•
If necessary, remove assembly underside protection
•
Remove reinforcement plate
•
If necessary, remove steering gear cover on both sides
•
Remove double joint from power steering gear
•
Remove tie rod end from swivel bearing
•
Replacement only:
-
Remove tie rod end at both ends of tie rod
•
Remove stabilizer link on both sides from stabilizer
If necessary, remove heat shield from power steering gear.
Release FCD couplings, disconnect hydraulic lines and lay to one
side.
Disconnect plug connection on EH converter
RA Removing and installing/replacing power steering gear
BMW AG - TIS
16.02.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
