X Series E83 X3 3.0i (M54) OFFRD
Release screws (1).
Turn left swivel bearing to left.
If necessary, detach pressure line from front axle carrier.
Turn power steering gear and remove through left wheel arch.
Installation:
Replace screws and self-locking nuts.
Tightening torque 32 00 1AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
RA Removing and installing/replacing power steering gear
BMW AG - TIS
16.02.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
