X Series E83 X3 3.0i (M54) OFFRD
32 31 241
Replacing adjusting lever for steering column
Necessary preliminary tasks:
•
Remove lower section of trim
Disconnect plug connections (1).
Remove wiring harness (2) from cable guide (3).
Release screws (1), remove cable guide (2).
Important!
Clamping bearing must be held down until secured.
Securing clamping bearing:
-
Pull retaining tab (1) in direction of steering column.
-
Turn clamping bearing head (3) so that pin (2) on clamping
bearing is held by retaining tab (1).
RA Replacing adjusting lever for steering column
BMW AG - TIS
16.02.2013 17:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -