X Series E83 X3 3.0i (M54) OFFRD
33 55 000
Removing and installing/replacing rear
stabilizer
Necessary preliminary tasks:
•
Remove emergency wheel pan
•
Remove stabilizer link on both sides from stabilizer
Release screws (1).
Remove stabilizer (2) towards rear.
Installation:
Check rubber mount on both sides, replace if necessary.
Tightening torque 33 55 3AZ
.
Replacement:
Remove rubber mount on both sides from stabilizer.
RA Removing and installing/replacing rear stabilizer
BMW AG - TIS
16.02.2013 18:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -