X Series E83 X3 3.0i (M54) OFFRD
34 33 071
Replacing vacuum hose for brake booster
(M54)
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove left partition wall for equipment compartment.
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the non-return valve.
-
If a rubber vacuum hose is fitted, it can be replaced
individually.
-
If a plastic vacuum line is fitted, it can only be replaced
as a single unit together with the non-return valve.
Release hose clip (1) and detach vacuum hose (2).
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster (M54)
BMW AG - TIS
16.02.2013 19:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
