X Series E83 X3 3.0i (M54) OFFRD
Guide handbrake Bowden cables (1) with a screwdriver inwards
and pull out of balance bar (2).
Disconnect handbrake Bowden cables at expander locks.
Release screw (1) and remove bracket.
Installation:
Tightening torque 34 41 5AZ
.
Pull handbrake Bowden cables (2) out of wheel carrier.
Disconnect handbrake Bowden cables (1) out of mountings (2).
Pull handbrake Bowden cables (1) out of guide (3).
Feed handbrake Bowden cables (1) out of guide of rear axle (4).
After installation:
•
Adjust handbrake
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
16.02.2013 19:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -