bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 RA Removing And Installing_replacing Bowden Cable For Outside Door Handle On Left O > < 11 RA Removing And Installing_replacing Outside Handle And Lock Actuation Of Left Or R
Page 1
background image

51 21 225

Removing and installing or replacing inside
door opener in left or right front door

Necessary preliminary tasks:

Remove front door trim panel

Unhook Bowden cable for release lever:

Tighten release lever (1).

Lever out lock (2).

Detach Bowden cable (3) towards rear/top.

Installation:

For fitting, press release lever (1) fully onto door trim panel.

Drive out spindle (1) in upward direction.

Remove door opener (3).

Installation:

Spindle (1) must be flush with housing (2).

RA  Removing and installing or replacing inside door opener in left or right front d

BMW AG - TIS

16.02.2013  22:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 RA Removing And Installing_replacing Bowden Cable For Outside Door Handle On Left O > < 11 RA Removing And Installing_replacing Outside Handle And Lock Actuation Of Left Or R