bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1752 > < 8 RA Blocking, If Necessary Initializing, Car Key In Immobilizer Control Module
Page 1
background image

51 21 170

Removing and installing or replacing outside
handle from left or right front door

Special tools required:

51 2 220

Necessary preliminary tasks:

Remove cover on outside handle

Removal:

Note:

Installation is described separately from removal.

 

Remove plate (1).

Installation:

If necessary, replace faulty trim (1).

Note:

Protect bore (1) against scratching (risk of corrosion).

Important!

If screw (3) is not correctly secured, the lock mechanism can
jump back and the sound insulation must be removed.

Pull outside handle (2) outwards/upwards and hold.

Using special tool 51 2 220 , turn screw (3) in counterclockwise
direction and thereby secure outside handle (2).

Tightening torque 51 21 5AZ

.

RA  Removing and installing or replacing outside handle from left or right front doo

BMW AG - TIS

16.02.2013  22:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1752 > < 8 RA Blocking, If Necessary Initializing, Car Key In Immobilizer Control Module