X Series E83 X3 3.0i (M54) OFFRD
51 23 ...
Adjusting/replacing bump stops
The illustrations are schematic representations and are to be
applied to the relevant vehicle type.
Version 1:
Following parts must not be damaged:
-
(1) Bump stop
Adjust bump stop (1) to correct height by turning left or right.
Version 2:
Replace damaged bump stops (refer to EPC):
-
(1) Bump stop with ejector
RA Adjusting/replacing bump stops
BMW AG - TIS
16.02.2013 22:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
