X Series E83 X3 3.0i (M54) OFFRD
Feed Bowden cable (1) in direction of arrow out of clip (2).
Feed out Bowden cable (1) in direction of engine compartment.
Important!
Check that grommet (2) is correctly seated (water ingress).
Installation:
Lay Bowden cable (1) without kinks.
Feed grommet (1) in direction of arrow out of bulkhead (2) and
remove Bowden cable (3) towards front.
Installation:
Check that grommet (1) is correctly seated
Lay Bowden cable (3) without kinks.
RA Removing and installing/replacing cable for front engine hood/bonnet locks (to p
BMW AG - TIS
16.02.2013 22:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -