X Series E83 X3 3.0i (M54) OFFRD
51 47 491
Removing and installing/replacing rear
underbody protection
Note:
Illustration created using 3.0d as an example. There may be
differences in detail in the case of other models.
Unfasten screws (1) and nuts (2).
Feed out assembly underside protection (3) towards rear and
remove.
Installation:
Ensure correct seating.
Centre assembly underside protection (3) and tighten down with
screws (1) and nuts (2).
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
16.02.2013 23:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
