X Series E83 X3 3.0i (M54) OFFRD
51 71 478
Removing and installing/replacing trim on
rear left or right wheel arch
Release blind rivets (1) and remove trim (2) towards top rear.
Installation:
Guides (1) on trim (2) must not be damaged.
Version with M Technic aerodynamic kit:
Release blind rivets (1).
Release trim (3) from clips (2) and feed out of sill and bumper.
Installation:
If necessary, replace faulty clips (2).
Trim (3) must be correctly fed into sill trim and bumper.
RA Removing and installing/replacing trim on rear left or right wheel arch
BMW AG - TIS
16.02.2013 23:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
