bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (from Battery To Engine Compartment Partition Co|Page 2235 > < 1 RA Notes On Handling Wiring Harnesses And Cables
Page 1
background image

61 12 004

Replacing battery positive lead (from battery
to engine compartment partition connector)

Warning!

Observe safety instructions for handling vehicle battery.

Necessary preliminary tasks:

Remove right luggage compartment wheel arch trim

Remove instrument panel trim

Remove right front seat

Remove central bass cover

Remove panel for door pillar on right

Unfasten plug connection (2) and disconnect.

Disconnect battery negative lead (1).

Open positive terminal cover (3).

Release nut (3), tightening torque  61 12 1AZ

.

Disconnect lead (4).

Release nut (1) of safety battery terminal (2), tightening torque 
61 21 1AZ

.

Important!

Do not under any circumstances pull/lever safety battery
terminal (2) off by force.

Detach safety battery terminal (2) towards top, lay to one side
and secure.

RA  Replacing battery positive lead (from battery to engine compartment partition co

BMW AG - TIS

17.02.2013  01:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead (from Battery To Engine Compartment Partition Co|Page 2235 > < 1 RA Notes On Handling Wiring Harnesses And Cables