X Series E83 X3 3.0i (M54) OFFRD
67 61 517
Replacing drive with gear (rear) for actuating
slide/tilt sunroof
Necessary preliminary tasks:
•
Remove rear grab handles
•
Remove trim for rear left and right roof pillar (C-pillar)
•
Remove trim for rear left and right roof pillar (D-pillar)
•
Remove left and right interior lights
•
Detach mucket in area of roofliner
Important!
Do not under any circumstance kink roofliner (1).
Unclip roofliner (1) at retaining point (2) towards bottom and
lower.
Note:
Secure drive with gear for actuating slide/tilt sunroof (4) against
falling out.
Release screws (3), tightening torque 54 13 1AZ
.
Lower drive with gear for actuating slide/tilt sunroof (4).
Note:
Screws (3) are microencapsulated.
Unlock plug connection (5), disconnect and remove drive with
gear for actuating slide/tilt sunroof (4).
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) exactly in gear teeth (3).
RA Replacing drive with gear (rear) for actuating slide/tilt sunroof
BMW AG - TIS
17.02.2013 04:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
