X Series E83 X3 3.0Si (N52K) OFFRD
Remove and insert oil filter element (1) in direction of arrow.
Installation:
Replace oil filter element (1) and sealing rings (2).
Installation:
Moisten sealing rings (2) with engine oil.
Tightening torque 11 42 1AZ
.
Note:
For purposes of clarity, the picture shows the assembly underside
protection and reinforcement plate removed.
Unclip service opening on reinforcement plate.
Open screw plug (1) in oil sump.
Drain engine oil.
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
Pour in engine oil.
Note:
Start engine and run at idle until oil pressure warning lamp goes
out.
Turn off engine.
Check oil filter cap and screw plug (1) on oil sump for leaks.
Assemble engine.
Checking engine oil level:
•
Park vehicle on a horizontal surface
•
Allow engine at normal operating temperature to run for three
minutes with increased revs (approx. 1100 rpm)
•
Read off engine oil level in instrument cluster or on Control
Display
•
Top up engine oil if necessary
RA BMW engine oil service incl. supplementary service (N52K)
BMW AG - TIS
21.02.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
