X Series E83 X3 3.0Si (N52K) OFFRD
32 21 231
Replacing (removing and installing) left or
right tie rod
Important!
The steering gear must be replaced if the polished surface of
the rack is damaged (e.g. by corrosion)!
Necessary preliminary tasks:
•
Remove tie rod end from swivel bearing
•
Remove gaiter from power steering gear and slide back
Important!
To avoid damage to rack and to suspension mounting, move
rack in as far as possible.
Screw tie rod off rack of power steering gear.
Installation:
Clean rack.
Check surface of rack for damage (e.g. corrosion).
Replace O-ring.
Grease rack and O-ring (refer to BMW Service Operating Fluids)
Tightening torque 32 21 2AZ
.
RA Replacing (removing and installing) left or right tie rod
BMW AG - TIS
21.02.2013 07:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -