bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Rear Left Outer Wheel Arch Section (rear Left Side Panel Removed)|Page 1407 > < 3 RA Replacing Engine Carrier With Wheel Arch, Left|Page 1405
Page 1
background image

41 14 502

Replacing rear left outer wheel arch section
(rear left side panel removed)

Read contents of Body, General.

Refer to texts on KSD CD (flat rate number 41 14 502)
for details of stripping and rigging tasks.

Following new body parts are required (refer to EPC):

(1) C-pillar reinforcement

(2) Inner side frame

(3) Rear outer entrance shaped part

(4) Rear entrance shaped part

Mark severance cut (1) in accordance with measurement and cut.

Important!

Cut outer metal sheet only.

Measurement a = approx. 160 mm from M8 threaded hole

Open weld joints in area (2).

Remove inner and outer cavity acoustic baffles (3).

RA  Replacing rear left outer wheel arch section (rear left side panel removed)

BMW AG - TIS

21.02.2013  11:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Rear Left Outer Wheel Arch Section (rear Left Side Panel Removed)|Page 1407 > < 3 RA Replacing Engine Carrier With Wheel Arch, Left|Page 1405