X Series E83 X3 3.0Si (N52K) OFFRD
51 12 156
Removing and installing rear bumper trim (up
to 09/2006)
Special tools required:
•
00 9 317
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release screws (1) and nuts (2).
Installation:
Make sure wheel arch trim (3) is in correct position.
Press wheel arch trim slightly to one side and release screw (1)
on bumper trim (2).
Release screws (1) on bracket (2).
RA Removing and installing rear bumper trim (up to 09/2006)
BMW AG - TIS
21.02.2013 12:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
