X Series E83 X3 3.0Si (N52K) OFFRD
Unlock plug connection (1) and detach high-pressure line (2)
from spray nozzle for headlight washer system (3).
Release screws (5).
Remove spray nozzle for headlight washer system (3) in
direction of arrow from bumper trim (6).
Installation:
Make sure guide (4) is correctly seated on bumper trim (6).
Keep plug connection (1) of high-pressure line (2) and high-
pressure nozzle (3) clean and free from grease.
Make sure high-pressure line (2) is correctly engaged on spray
nozzle (3).
If necessary, top up washer fluid.
RA Removing and installing/replacing spray nozzles of headlight washer system on le
BMW AG - TIS
21.02.2013 17:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
