bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Servodrive For Rear Lid Lock > < 2 RA Removing And Installing_replacing Servodrive For Rear Left Or Right Door Locking
Page 1
background image

67 11 555

Removing and installing/replacing servodrive
for tank filler flap

Necessary preliminary tasks:

Remove right luggage compartment wheel arch trim.

Unclip emergency actuator (1) on emergency actuator pull
strap (2).

Feed out emergency actuator pull strap (2) through opening (3).

Slacken screws (4) and feed servodrive for tank filler flap (5)
towards rear out of retaining plate.

If necessary, carry out adjustment of servodrive for tank filler
flap (5) via elongated holes of retaining plate. It must be possible
to lock or unlock the fuel filler flap completely.

Disconnect associated plug connection and remove servodrive for
tank filler flap (5).

Installation:

Insert servodrive for tank filler flap (1) in direction of arrow into
gaiter (2).

Replacement:

Unhook emergency actuator pull strap (1) from clip (2) and
remove from locking pin (3) of servodrive for fuel filler flap (4).

RA  Removing and installing/replacing servodrive for tank filler flap

BMW AG - TIS

21.02.2013  19:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Servodrive For Rear Lid Lock > < 2 RA Removing And Installing_replacing Servodrive For Rear Left Or Right Door Locking