Z Series E52 Z8 (S62) ROADST
33 55 000
Removing and installing / replacing rear
stabilizer
Release stabilizer link on left and right on stabilizer (1).
Release screws on retaining bracket (2) on left and right.
Remove stabilizer.
Installation:
Wet retaining bracket with low-surface-tension water.
Check rubber mount, replace if necessary.
Rubber mount, retaining bracket and stabilizer bar free of
grease.
Tightening torque 33 55 2AZ
Tightening torque 33 55 3AZ.
RA Removing and installing / replacing rear stabilizer
BMW AG - TIS
07.02.2013 01:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
