Z Series E52 Z8 (S62) ROADST
Release screws (1) on bar (2) above rear window.
Unhook roofliner.
Release roofliner at both bars in same way.
Installation:
Slide metal rail (1) into loop (2) of roofliner until it is flush with loop.
Screw loop and metal rail to bar.
Caution!
Convertible top frame is made of magnesium.
Do not damage surface (e.g. scratches). Any damage will
result in destruction of the convertible top frame.
Touching up with matching paint is not possible. Convertible
top frame will continue to oxidize.
A damaged convertible top frame must be replaced.
Release screws (1) on convertible top frame at front.
RA Removing and installing or replacing headlining in convertible top
BMW AG - TIS
07.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -