Z Series E85 M roadst (S54) ROADST
Removal
Removal of cylinder head is described separately from installation.
Remove camshafts.
Caution!
It is very easy for the adjustment plates to fall down.
Raise rocker arm.
Note:
Special tool 11 4 400 is magnetic.
Remove all adjustment plates with special tool 11 4 400 and
set to one side in order.
Caution!
The connector strip may break if it is removed without special
tool 12 1 120 .
Unlock connector strip with special tool 12 1 120 in
sequence 1 to 6.
Press lock and detach hose from supplementary air line.
RA Removing and installing/sealing cylinder head (S54)
BMW AG - TIS
06.02.2013 19:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
