Removing And Installing Vibration Damper for Z Series E85 M roadst (S54)
Unfasten screws. Remove belt pulley.
Mount special tool 11 0 280 on vibration damper.
Note:
Special tool 11 0 280 is supported on mounting bracket for A/C
system.
Caution!
Do not damage mounting bracket for A/C system.
Loosen screws (1).
Remove special tool 11 0 280.
Caution!
Do not damage belt pulley of water pump.
Remove vibration damper from crankshaft and feed out below belt
pulley of water pump.
Installation:
Align locating bore in vibration damper to dowel pin (1).
RA Removing and installing/replacing vibration damper (S54)
BMW AG - TIS
06.02.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -