Z Series E85 M roadst (S54) ROADST
11 28 050
Replacing A/C compressor drive belt (S54)
Note:
If the drive belt is to be subsequently reused:
Mark direction of travel and reinstall drive belt in same direction
of travel.
Remove engine splash guard.
Push back belt tensioner at hexagon head and remove drive belt.
Caution!
If contaminated with hydraulic fluid: Replace drive belt.
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Installation:
Fit drive belt and check if it is correctly located on pulleys.
RA Replacing A/C compressor drive belt (S54)
BMW AG - TIS
06.02.2013 19:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
