Z Series E85 M roadst (S54) ROADST
Coat toothing of toothed sleeves (3) with engine oil as antiseize
agent.
Install toothed sleeves (3) of exhaust and inlet camshafts.
Align bores in toothed sleeves (3) to tapped holes in camshafts.
Important!
Note installation direction of thrust washers (2).
Large chamfer points to camshaft.
Note installation direction of thrust washers (2).
Fit thrust washers (2) on centering sleeves (1) in such a way
that large chamfer points towards rear to camshaft.
Fit centering sleeve (1) on exhaust and inlet sides with thrust
washer (2).
Grip camshafts at hexagon head.
Tighten down bolts on centering sleeves (1).
RA Replacing camshafts (S54)
BMW AG - TIS
06.02.2013 19:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -