Z Series E85 M roadst (S54) ROADST
Push on VANOS adjustment unit until it contacts special tool
11 9 170 .
Important!
If this position is not reached, realign position of radial piston
pump to driver.
Important!
Do not tighten down screws.
Note:
Screw on left and right serves to secure the VANOS adjustment
unit.
Insert a screw on left and right and tighten by hand until free of
play.
Note:
The procedure described below helps to provide compensation for
play.
Only with this compensation for play is the timing diagram
correctly set.
Note:
To tighten down screws on VANOS gear: Use special tool
11 7 200 .
Tighten down the two opposing screws on the inlet and exhaust
sides of the VANOS gear to 14 Nm.
Then slacken all four screws by a 1/4 turn.
RA Replacing camshafts (S54)
BMW AG - TIS
06.02.2013 19:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 25 -
