Z Series E85 M roadst (S54) ROADST
Replace sealing rings of banjo bolt.
Insert banjo bolt but do not tighten down yet.
Install bracket of oil line. Install screw and tighten down.
Tighten down banjo bolt of oil line.
Tightening torque 11 36 9AZ
.
Assemble engine.
There is air in the VANOS system once it is opened.
In the first few seconds after startup this results in a clearly
discernible "rattling noise".
This rattling noise does "not" indicate incorrect assembly.
The rattling noise will disappear as soon as the oil pressure has
built up and the system has vented.
Perform VANOS test.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S54)
BMW AG - TIS
06.02.2013 21:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -