Z Series E85 M roadst (S54) ROADST
Removal:
Removal of a throttle valve assembly is described separately from
its installation.
Unclip pull rod (1) for throttle valve actuator on throttle valve side
(long pull rod).
Unclip pull rods (1) on all throttle valve assemblies.
Release screw connection of actuating lever on long pull rod.
Always grip screw (2) and turn nut (1) in so doing.
RA Removing and installing/sealing a throttle valve assembly (S54)
BMW AG - TIS
06.02.2013 21:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -