Z Series E85 M roadst (S54) ROADST
Clear DME fault memory.
In the Diagnosis and Information System (DIS), go to the
"Function and component selection" page.
By selecting:
-
Complete vehicle
-
Drive
-
Engine management
-
Tank system test
-
Tank leakage diagnostic module (DM-TL)
Adopt test module in test schedule.
Switch to the test schedule and implement the tank leakage
diagnosis module. Leakage test is carried out.
Carry out leak detection if the fault is stored again in the DME fault
memory (tank leak detected)
RA Checking fuel tank and tank venting system for leaks with tank leakage diagnosis
BMW AG - TIS
06.02.2013 21:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
