Z Series E85 M roadst (S54) ROADST
Unlock and detach coolant hose (1).
Unlock and detach vent hose (2). Unclip vent hose (line) from
expansion tank (3).
Unscrew nuts.
Raise expansion tank (4) slightly. Unlock and disconnect
plug (4) for coolant level switch.
Remove expansion tank.
Installation:
When installing expansion tank, insert bearing pin (1) into rubber
mount (2).
Note:
Vent cooling system and check for leaks.
RA Removing and installing/replacing coolant expansion tank (S54)
BMW AG - TIS
06.02.2013 22:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -