Z Series E85 M roadst (S54) ROADST
Release screws and uncouple engine oil cooler (1) slightly.
Release screw (2).
Detach oil cooler line (3) from engine oil cooler (1).
Catch and dispose of escaping oil.
Remove engine oil cooler.
Installation:
Use new sealing rings.
Note:
After completion of work, check engine oil level.
RA Removing and installing/replacing engine oil cooler (S54)
BMW AG - TIS
06.02.2013 22:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -