bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Rear Muffler (S54)|Page 711 > < 3 RA Removing And Installing_replacing Catalytic Exhaust Gas Converter (S54)|Page 708
Page 1
background image

18 10 025

Removing and installing/replacing rear
muffler (S54)

Warning!

Scalding hazard!

Only perform these tasks after exhaust system has cooled
down.

Important!

Support rear muffler on jack.

Note:

Illustrations show and descriptions refer to the left rear muffler.
The procedure is identical for the right filter housing.

Release screw connections between rear and centre mufflers.

Installation:

Check sealing rings, replace if necessary.

Replace self-locking nuts.

Coat thread with copper paste -CRC-, refer to BMW Parts
Service.

Unscrew nuts (1).

Unscrew nuts (2).

Remove rear muffler from below.

RA  Removing and installing/replacing rear muffler (S54)

BMW AG - TIS

06.02.2013  22:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Rear Muffler (S54)|Page 711 > < 3 RA Removing And Installing_replacing Catalytic Exhaust Gas Converter (S54)|Page 708