Z Series E85 M roadst (S54) ROADST
23 11 614
Replacing guide tube for clutch release unit
(GS6-37BZ/DZ)
Note:
(transmission removed)
Necessary preliminary tasks:
•
Remove clutch release bearing and release lever from guide
tube.
Unfasten screws.
Remove guide tube (1).
Installation:
Clean thread.
Install screws with Loctite 243.
Tightening torque 23 11 2AZ
.
Note:
Remove sticker (1) and adhesive with a suitable solvent.
RA Replacing guide tube for clutch release unit (GS6-37BZ/DZ)
BMW AG - TIS
06.02.2013 22:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
