Z Series E85 M roadst (S54) ROADST
Attach special tool 31 2 153 with spindles 31 2 154 to control
arm opening.
Install new bracket with special tools 00 7 500 , 31 2 152 and
31 2 157 on control arm pin up to marking.
Relieve tension on special tool. Check position of rubber mount to
marking and correct if necessary.
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Install heat shield (3).
Align bracket (2) to engine carrier.
Replace bolts (1) and tighten down.
Tightening torque 31 12 7AZ
.
After installation:
•
Check freedom of movement of other components to bracket
for control arm
RA Replacing both brackets for control arm (M Roadster, M Coupé)
BMW AG - TIS
06.02.2013 22:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -