Z Series E85 M roadst (S54) ROADST
33 55 000
Removing and installing/replacing rear
stabilizer (M Roadster, M Coupé)
Necessary preliminary tasks:
•
Remove both tension struts.
•
Remove cover for carbon canister
•
Partially lower exhaust system (remove rear muffler from
body)
Release nuts at both ends.
Remove stabilizer link bracket on both sides from control arm.
Installation:
Replace self-locking nut.
Tightening torque 33 55 5AZ
.
Important!
Risk of damage!
To avoid scratching by the stabilizer link bracket, it will be
necessary to tape off the output shafts and lower control
arm.
Release screws on both sides.
Remove stabilizer from rear axle carrier and feed out.
Installation:
Check rubber mount on both sides, replace if necessary.
Tightening torque 33 55 3AZ
.
RA Removing and installing/replacing rear stabilizer (M Roadster, M Coupé)
BMW AG - TIS
07.02.2013 00:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -