Z Series E85 M roadst (S54) ROADST
51 71 120
Removing and installing/replacing cowl panel
seal
Necessary preliminary tasks:
•
Follow repair instructions for bonded seals.
•
Remove trim for roofliner
•
Remove both trim panels for roof pillar
Removal:
Release left and right screws (1).
Detach seal (2) from window frame.
Note:
Seal (1) is secured to A-pillar with butylene tape or double-sided
adhesive tape.
Clean adhesive area prior to installation.
Installation:
Release screws (1) and remove trim (2).
Feed in seal (1) on trim (2) and position on window frame.
Slide seal (1) with trim (2) under rubber frame (3).
RA Removing and installing/replacing cowl panel seal
BMW AG - TIS
07.02.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -