Z Series E85 M roadst (S54) ROADST
54 34 205
Removing and installing/replacing all
hydraulic lines on convertible top
Important!
Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic cylinder.
Protect components and work area with suitable materials
(e.g. absorbent protective cover).
Have cleaning cloths ready to wipe away escaping oil.
Follow repair instructions for hydraulic system.
Necessary preliminary tasks:
•
Remove convertible top
•
Detach lines from hydraulic unit
Detaching lines from hydraulic cylinder:
Connection, top
-
Left line 12, right line 14
-
Detach clip
-
Pull line carefully out of cylinder
Connection, bottom
-
Left line 11, right line 13
-
Release screw (1).
-
Replace tab washer (2).
-
Pull line (3) carefully out of cylinder.
If necessary, cut cable tie (4).
Disconnect hydraulic lines for right and left sides (insulating tape).
RA Removing and installing/replacing all hydraulic lines on convertible top
BMW AG - TIS
07.02.2013 04:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -