Z Series E85 M roadst (S54) ROADST
Important!
To avoid scratches:
•
Cover center console with a protective cover (1).
•
Remove heater - A/C system control panel (2) carefully
through opening (B).
Press out heater - A/C system control panel (2) in direction of
arrow (A) and remove through opening (B).
Installation:
Check retaining clip (1) for deformation; replace if necessary.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) control panel for heater - A/C system
BMW AG - TIS
07.02.2013 05:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
