bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing A_C System Compressor (S54)|Page 2261 > < 3 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2259
Page 1
background image

64 52 523

Replacing A/C system compressor (S54)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor. 

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:

Replacing drier insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Release fluid reservoir for windscreen washer system and

place to one side 

Remove front underbody protection

Remove A/C compressor drive belt

Release screws (1) and remove refrigerant lines.

Installation:

Tightening torque 64 52 1AZ

.

Replace all sealing rings and moisten with refrigerant oil.

 

Disconnect plug connection (2).

Release screw (3).

Tightening torque 64 52 3AZ

.

RA  Replacing A/C system compressor (S54)

BMW AG - TIS

07.02.2013  06:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing A_C System Compressor (S54)|Page 2261 > < 3 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2259