Z Series E85 M roadst (S54) ROADST
65 50 011
Removing and installing/replacing video
module for on-board monitor
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove panel for luggage compartment partition
Mark antenna plugs (3) and disconnect.
Unlock plug connections (4) and disconnect.
Release nut (5).
Remove video module for on-board monitor (1) from holder (2).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
RA Removing and installing/replacing video module for on-board monitor
BMW AG - TIS
07.02.2013 06:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
