Z Series E85 M roadst (S54) ROADST
65 77 016
Removing and installing/replacing airbag
control unit
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover.
•
Remove rear storage compartment.
Cut through carpet (1) in area (2) and fold to one side.
Unlock plug connections (3) and disconnect.
Unscrew nuts (4).
Installation:
Tightening torque 65 77 1AZ
.
Feed out airbag control unit (5) in direction of arrow and remove.
RA Removing and installing/replacing airbag control unit
BMW AG - TIS
07.02.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
